First and Second Stage 124 Single Disc Mills
Proven technology updated
CCMC’s 124 single Disc Mills are designed for optimum performance. Our engineers focused on structural stability to minimize vibration, reducing maintenance cost and solidifying the tram control. The results produced one of the finest wet corn disc mills on the market today.
Design features
The 124’s heavy construction and rigid refiner case supports maintain tram alignment unsurpassed in the industry. With heavy duty motor supports, 1/2”(1.3cm) thick mounting plate and 3/4”(2cm) diameter threaded motor mounting rods, vibration is greatly reduced. Additionally, all process contact parts are constructed with 316 stainless steel for increased operating life.
Mechanically adjusted plate gap
The location of the grind disc, which controls plate gap, is accurately controlled within thousandths of an inch by a hand wheel located on the side of the mill. This unit was designed with the features of a mill twice its size.
Capacities
1st grind-8,000 bushels/day (204 metric tons/day)
2nd grind-16,000 bushels/day (408 metric tons/day)
3rd grind-8,000 bushels/day (204 metric tons/day)
Specifications:
24”(60.9cm) diameter disc
75HP(55KW) maximum
1,800 RPM maximum speed
Grease lubricated bearings
Gravity feed
Hinged door swings both ways for ease of plate changes
Manual disc positioning
All process contact parts 316 stainless steel
Belt drive with extra heavy duty motor supports
Approximate weight (less motor) 2,500 lbs(1140kg)
Dimension-52”Hx66”Lx36”W(132cmHx168cmLx91.5cmW)
First and Second Stage 136 Single Disc Mills
Proven technology updated
CCMC’s 136 single Disc Mills are designed for optimum performance. Our engineers focused on structural stability to minimize vibration, reducing maintenance cost and solidifying the tram control. The results produced one of the finest wet corn disc mills on the market today.
Design features
The 136’s heavy construction and rigid refiner case supports maintain tram alignment unsurpassed in the industry. With heavy duty motor supports, 1”(2.54cm) thick mounting plate and 2”(5.08cm) diameter threaded motor mounting rods, vibration is greatly reduced. Additionally, all process contact parts are constructed with 316 stainless steel for increased operating life.
Quick release mechanism
The location of the grind disc, which controls plate gap, is accurately controlled within thousandths of an inch by a hand wheel and indicator dial. The disc is held in position with springs that maintain a constant loading pressure. CCMC’s quick release mechanism is designed for simple and easy retraction of the grind disc, and includes a safety lock that prevents accidental clashing of the grind plates.
The INPRO/SEAL bearing isolator
CCMC has incorporated into the design of the 136 Single Disc Mill one of the industry’s finest bearing isolators - the INPRO/SEAL bearing isolator. This design provides a positive vapor seal when the seal is stationary but has no contacting parts when the shaft is rotating. The INPRO/SEAL bearing isolator hermetically seals the bearing housing from any possible contaminate in the bearings and the lubricating medium.
Quick belt change
One of the 136 Single Disc Mill’s exclusive feature is the quick belt change option. This feature was designed with efficiency in mind and for simplified maintenance of the drive belts, resulting in less downtime.Changing belts is a simple three step operation. After the belt tension is released and the anchor bolts removed from the outboard housing, the support blocks are pulled-out from under the bearing housing, allowing the old belts be easily removed. Reverse the process and installation of new belts is just as simple.
Specifications:
36”(91.4cm) diameter disc
250HP(186.4KW) maximum
1,800 RPM maximum speed
Grease lubricated bearings
Gravity feed
Hinged door swings both ways for ease of plate changes
Manual disc positioning
Quick release mechanism
All process contact parts 316 stainless steel
Belt drive with extra heavy duty motor supports
Approximate weight (less motor) 6,600 lbs(2994kg)
Dimension-49”Hx48”Lx89”W(124.5cmHx121.9cmLx226.1cmW)
Capacities
1st grind-20,000 bushels/day (510 metric tons/day)
2nd grind-40,000 bushels/day (1020 metric tons/day)
First and Second Stage 152 Single Disc Mills
Proven technology updated
CCMC’s 152 single Disc Mills are designed for optimum performance. Our engineers focused on tram alignment, the minimization of vibration and equipment durability, producing one of the finest wet corn disc mills on the market today.
Design features
The 152’s heavy construction and rigid refiner case supports maintain tram alignment unsurpassed in the industry. All process contact parts are constructed with 316 stainless steel for increased operating life. The 152 features a replaceable stainless steel hard coated shaft sleeve that protects the shaft from process corrosion and abrasion.
Specifications:
52” diameter(132cm), split plate seat 52”(132cm) and 36”(91.4cm)
1,000HP(746KW) maximum
1,800 RPM maximum speed
Oil circulating lube system integral to base
Gravity feed
Hinged door swings both ways for ease of plate changes
Manual disc positioning
All process contact parts 316 stainless steel
Direct drive with free standing coupled motor
Approximate weight (less motor) 14,200 lbs(6441kg)
Dimension-69”Hx68”Lx106”W(175cmHx173cmLx269cmW)
Capacities
1st grind-40,000 bushels/day (1,020 metric tons/day)
2nd grind-60,000 bushels/day (1,530 metric tons/day)
3rd grind-40,000 bushels/day (1,020 metric tons/day)
Motor: 1,000HP(746KW), 1,800RPM
Contact Now
